FormFutura Engineering LCD Series Flex 63A Resin - Clear, 500 g

Formfutura's Engineering LCD Series photopolymer 3D printing resins are specially designed for compatibility and excellent processability with all types of open source LCD, LED and MSLA 3D printers.

The Engineering LCD series - Flex 63A Resin is a very flexible and extremely transparent 3D resin with a low surface hardness of 63A. The combination of flexibility and elasticity makes FormFuturas Engineering LCD Series - Flex 63A Resin a very versatile 3D printing resin for a wide variety of applications.

Key Features

• Excellent flexibility
• High elongation properties up to 80%
• Good elastic properties
• Extremely transparent without discolouration and/or yellowing
• High dimensional accuracy and low shrinkage
• Almost odourless processing
• Compatible with all open-source SLA, DLP and LCD 3D printers in the range from 385 to 405 nm

Applications

• Seals
• Soft-touch applications
• Functional prototyping
• Wearables
• Short-run manufacturing

Preparations Before Starting Printing

• Shake the bottle for at least 2 minutes before each use.
• After shaking the bottle, let the resin sit for 10 minutes to allow air bubbles to escape from the resin. The resin can be poured back from the vat into the bottle once the printing is complete.
• Always use protective measures such as safety glasses and nitrile gloves when handling resins.

Post-processing

• It is recommended to post-process the 3D print in order to achieve the material properties. Rinse your 3D printed object for approx. 5 minutes in IPA or (bio) ethanol.
• An ultrasonic cleaner is preferred/recommended
• Make sure items rinsed with IPA and/or (bio) ethanol are perfectly dry before further curing.
• Place the purged parts in a well-ventilated area for at least 30 minutes or use compressed air for at least 2 minutes.
• Cure your object in a high-performance curing chamber for approx. 20-30 minutes at 65 ° C.
• The preferred curing wavelength is between 300 and 410 nm.

Safety

• Please always note that you are working with chemicals when 3D printing with resin and should always be careful and use the personal protective equipment specified in the safety data sheets.
• Always wear respiratory protection when sanding/cutting the printed object.
• Always use nitrile gloves when handling resins and uncured resin items.