Phrozen TR300 Ultra-High-Temp Resin in Grey, 1.000 g

Phrozen's TR300 resin has extremely high heat resistance, high mechanical strength and toughness, making it ideal for high-temperature applications such as dental thermoforming and industrial mock-ups.

It was specially developed for 405nm LCD 3D printers and takes only 1.3 seconds to cure when printed with a 3D printer from the Phrozen Sonic series.

Properties

• Viscosity: 160 cps at 250 ° C
• Density: 1.1 g / cm3
• Tg (glass transition temperature): 220 ° C
• Tensile elongation at break: 2%
• Tear strength: 32 MPa
• Tensile modulus: 1850 MPa
• Surface hardness: Shore 80D
• Pencile hardness: 5H (at 500g load)
• IZOD notched impact strength: 8 KJ / m2

Instructions for use

• Clean the model with alcohol spray, do not immerse in alcohol for long periods of time.
• Store resins at room temperature and in dark, ventilated areas.
• Shake resin well before use.
• Used resins should be stored in a closed, opaque bottle after printing. Mixing used and a new resin should be avoided.
• Resins should always be kept away from children and direct sunlight.
• It is important to wear gloves and a mask when using it. In the event of direct skin or eye contact, wash off immediately with water.
• Resin cannot simply be disposed of. It should be hardened and then disposed of as general plastic waste.