Micro-Swiss FlowTech™ Hotend for Creality K1 Max

With the FlowTech™ Hotend, Micro-Swiss introduces a new generation of hotends that, thanks to a special design, eliminates common problems such as leaky nozzle seals or laborious nozzle replacement processes.

► This hotend is compatible with Creality K1 Max. No firmware changes are required.

Important: The original hotend of the Creality K1 Max has already been re-versioned by the manufacturer. Before ordering, check whether your hotend has an adjusting screw on the heat sink or not, as this determines the compatibility of the FlowTech™ hotend. The older version has a screw, while the newer version does not. Please note the corresponding product photo for illustration.

Leak-proof design and all-metal construction

The FlowTech Hotend consists of a permanently sealed assembly of a nozzle and thermal break. This leak-proof design ensures that no print is ruined or material wasted by a leaky nozzle.

Thanks to its durable all-metal design, the hotend can handle most 3D printing filaments.

Cold Nozzle Change

With the FlowTech Hotend, the nozzles can be changed one-handed and without hot tightening, which significantly minimises the risk of injury.

High flow

A cylindrical ceramic heater and a 28.6 mm melting zone ensure high flow.

For temperatures up to 300 °C

The hotend has an NTC thermistor and supports temperatures of up to 300 °C.

Included:

• 1 x FlowTech™ Heater Core
• 1 x Copper thermal adapter
• 1 x FlowTech™ 0.4mm nozzle
• 2 x titanium mounting screws
• 1 x silicone sock