Magigoo 3D Glue Stick for PP, 50 ml

WHAT?

MAGIGOO PP is designed for professional use to work exclusively with polypropylene filaments. The part is relatively easy to remove after cooling and the glue residue can also be easily removed.

WHY?

Polypropylene (PP) is a thermoplastic semi-crystalline polymer that exhibits good impact strength and ductility. It is chemically resistant and therefore ideal for use in food packaging and medical devices.

HOW?

MAGIGOO PP was developed and tested to work with different PP filament brands.

• Shake the bottle vigorously.
• Apply to the desired area by pushing onto the print bed (activation of the inner valve) and spreading as needed.
• Print according to the recommendations of the filament/printer manufacturer
• Allow to cool and remove - The part should be easier to remove after adequate cooling. If the part is difficult to remove, a scraper or similar should be used to assist in removing the part.
• Cleaning - Use a damp, hard sponge to remove all adhesive residue. Once the adhesive layer is wet, it forms a white layer that can easily be rubbed off with a sponge. Once the layer is completely detached from the glass, it can be wiped with a damp cloth and finally cleaned with a dry paper towel.

Tips

For larger prints, a 20 mm wide multi-layer edge is recommended
In cases of excessive adhesion, it is recommended to moisten the bed with a small amount of water.