Elegoo Mini Heater

The Elegoo Mini Heater is the perfect solution if you're having problems such as poor adhesion or deformation. This compact device ensures an optimum temperature in your printing area and thus improves the quality of your models.

Intelligent temperature control & ultra-fast PTC heating technology

The Mini Heater has intelligent temperature control, which ensures that printing problems due to detachment, deformation or poor adhesion of the intermediate layers do not occur. Thanks to the automatic heating function, the Heater switches on automatically at temperatures below 25°C and switches off automatically at temperatures above 25°C to ensure a constant temperature in the chamber.

With 120 W of power, the Mini Heater with PTC heating technology is incredibly efficient and energy-saving without reducing the heat output.

10,000 rpm high-speed fan

For rapid heat transfer, the Mini Heater is equipped with a high-speed fan with 10,000 revolutions per minute. The fan ensures an ideal air flow and even heat distribution to maintain a constant temperature.

Real-time temperature control

The ability to keep track of the temperature at all times and in real time enables you to recognise temperature-related problems and rectify them immediately.

Heater and fan in one

In addition to the heating function, the Mini Heater is also equipped with an efficient air filter system to remove impurities in the chamber.

Other features:

• Dimensions: 59 x 71 x 132 mm,
• User-friendly design,
• Easy to install,
• Wide compatibility with Elegoo printers (Mars 5 Ultra, Mars 5, Mars 4 Max, Mars 4 DLP, Saturn 4, Saturn 4 Ultra, Saturn 3, Saturn 3 Ultra, Saturn 2, Saturn 8K, Saturn S, Jupiter SE), and also adaptable to printers from other manufacturers.

Installation:

1. Fix the adapter plate properly to the printer enclosure with the screws supplied in the tool kit.
2. Fasten the Mini Heater to the adapter plate with the screws included in the set.
3. Connect the device to the power supply and press the switch to activate the Mini Heater. If the temperature in the chamber drops below 25°C, the heater switches itself on - (indicator light goes on).

Included in the delivery:

• 1 x Mini Heater
• 2 x filters
• 1 x adapter plate
• 1 x power cable
• 1 x tool kit
• 1 x user manual